Most EPDM plugs that fail early were not defective. They were fitted badly, handled roughly, or left in service after they were already damaged. Orchid Industries has supplied EPDM and other inspection plugs since 2009 for UAE refinery and power projects, including ADWEA Shuweihat and TAKREER, and most of the seal problems we are asked…

Why do two quotes for what looks like the same inspection plug come out at very different prices? Usually because they are not the same plug. Orchid Industries has supplied inspection plugs since 2009 for projects such as TAKREER Ruwais and Al Hosn Gas, and we see this confusion in procurement every month. Prices depend…

A cryogenic line does not forgive a badly specified inspection point. Cold pipes pull moisture toward them, and a weak spot in the insulation lets that moisture in. Orchid Industries has supplied inspection plugs since 2009 for refinery, gas and power projects, including Al Hosn Gas and TAKREER in Abu Dhabi, and our cryogenic range…

Most delays around inspection points have nothing to do with the inspection itself. They come from a small part that arrives late, arrives wrong, or arrives without the right paperwork. Orchid Industries has supplied inspection plugs since 2009, including for the TAKREER Ruwais Refinery Expansion and Al Hosn Gas SGD projects in Abu Dhabi. If…

If you have come across both TML and TMLX inspection plugs while placing an order and were not entirely sure which one applies to your line, you are asking a question that trips up a lot of buyers. Orchid Industries has been supplying inspection plugs and insulation products to industrial facilities across the UAE since…

You have ever stood in front of a supplier’s product list trying to decide between a silicone plug and an EPDM plug, you are not alone. It is one of the most common questions we get at Orchid Industries, and honestly, most people asking it were never given a clear answer before. Orchid Industries has…